Example 3D machine by AI Properly: Brockbank is an example brand, and this spreader is an example machine.
AI Properly for business Free preview
An orange Brockbank example muck spreader with twin upright beaters at the back, tandem axles and a drawbar
Example · 3D
1 of 8

3D isn't available here, so this is a picture.

3D example · how it works

A muck spreader, from the load to the field

Scroll to follow the muck through the machine: back along the floor, through the door and out through the beaters. Tap Run it to set it going, and the numbers to see what each part does.

It's an example of what I build. For your business, I model your own machine from your photos and published sizes.

  • How it works
  • Moving parts
  • Your own machine

Step 1

The body takes the load

Farmyard manure goes in from the top, usually with a loader bucket. Pressed ribs stiffen the steel sides, and the flared top edge gives the bucket room.

Step 2

The floor carries it back

A hydraulic motor at the front turns the floor shaft. Two chains drag steel slats along the floor, so the whole load creeps back towards the beaters.

The driver sets the floor speed from the tractor seat, and that sets how thickly it spreads.

Step 3

The door lifts

On the road the hydraulic door holds the load in. In the field two rams lift it, and the floor feeds the muck straight into the beaters.

Step 4

The beaters shred and spread

Two upright beaters spin in opposite directions. Spiral flighting and hardened tines tear the muck up and throw it out behind the machine in a wide, even spread.

Step 5

Power from the tractor

The PTO shaft from the tractor turns a gearbox on the drawbar. A driveline under the body takes the drive back to the beater gearboxes.

Step 6

Built for soft ground

Tandem axles on wide flotation tyres carry the weight, so it runs on wet grassland without rutting it. Door down, and it's ready for the road.

Your turn

Now try it yourself

Turn it round, zoom in, run it, open the door and tap any number to see what that part does.

For machinery makers

Your machine, like this.

This spreader is an example. For your business I build your own machine from your photos and published sizes, use your own words for every step, and label it as an illustration. You check it before anyone sees it.

On your website

A "how it works" tour like this one, with your moving parts, on your product pages.

On your show-stand screen

A 20 to 40 second loop of the machine at work, made to play all day on a screen.

In reels and brochures

The same model from any angle: stills for print and short clips for social media.

  • 3D model of a machinefrom £795
  • Animation video, 20 to 40 secondsfrom £495
  • Animated tour for your websitefrom £395

Detailed, not CAD. A fixed quote first and no monthly fee. The 3D on this page is an illustration of an example machine.

See one for your machineSee the roaster tour